Replacing The Batteries - Semtech Asset Tracking Reference Kit User Manual

Replacing the Batteries

To replace the batteries in a tracking device, take the following steps:
Step 1: Unscrew the battery cover (using a T6
screwdriver)
Step 2: Remove the battery cover
Step 3: Remove the batteries
Step 4: Place new batteries in the device
Step 5: Replace the battery cover
Step 6: Screw in the battery cover (using a T6
screwdriver)
Figure 17: Changing sensor batteries
Problems/Concerns
Direct any problems or concerns to https://info.semtech.com/.
Page 15 of 21
semtech.com/LoRa
Asset Tracking Reference Kit User Guide
Proprietary
Guide
Semtech
February 2020