Asset Tracking Kit Welcome
Welcome!
The Asset Tracking Kit ("Kit") is a portable reference Kit designed to validate LoRaWAN® network coverage
around a building or site and to accelerate solution development for a wide range of stakeholders. The self-
contained nature of this reference Kit makes it easy to set up, take down and move a network in a matter
of minutes.
Users can determine a gateway's range of coverage by moving the location of the sensors to different spots
around a building. Furthermore, solution developers can focus on providing customer value through data
collection and analysis by using off-the-shelf hardware available from external suppliers.
The GPS location data of each tracker is displayed on a dashboard that users can access through a web
browser. The dashboard shows the type of displays that can be created with the data collected (See Figure
4 and Figure 5 below). The URL for the dashboard and how to locate the login credentials for your Kit are
explained under the Getting Started section of this guide.
Note: This Kit does not allow direct access to the underlying data or the ability to change the LoRaWAN
network server (LNS) to which the gateways are connected. If those are desired requirements, please
contact Semtech at
ATKSales@semtech.com.
What is in the Kit?
The Kit contains the following items:
6 LoRa®-based GPS trackers
1 LoRaWAN gateway with Cellular backhaul
Power brick
LoRa antenna (1)
GPS antenna (1)
Cellular antenna (1)
Ethernet cable (1)
Magnets (2)
Figure 1 - LoRa-based GPS tracker