2. Set Up Your Gateway Step 1: Connect the adapter to the LoRa®-based antenna Page 2 of 6 semtech.com/LoRa Asset Tracking Kit: Quick Start Guide Proprietary & Confidential User Guide Semtech January 23, 2020...
Page 3
Step 2: Connect LoRa-based antenna to the gateway Step 3: Connect the Ethernet cable to the gateway Step 4: Connect the Ethernet cable to the power brick Page 3 of 6 semtech.com/LoRa Asset Tracking Kit: Quick Start Guide Proprietary & Confidential User Guide Semtech January 23, 2020...
Page 4
Step 5: (Optional) Connect the GPS cable to the GPS Antenna Step 6: (Optional) Connect GPS cable to the gateway Step 7: Connect the power brick to a power source Page 4 of 6 semtech.com/LoRa Asset Tracking Kit: Quick Start Guide Proprietary & Confidential User Guide Semtech January 23, 2020...
To turn on a tracking sensor, put the magnet (included) against the tracking device on the side end near the oval opening, as shown below. 4. Getting More Help Direct any questions or concerns to ATKSupport@semtech.com Page 5 of 6 semtech.com/LoRa Asset Tracking Kit: Quick Start Guide Proprietary & Confidential User Guide Semtech January 23, 2020...
Page 6
Information relating to this product and the application or design described herein is believed to be reliable, however such information is provided as a guide only and Semtech assumes no liability for any errors in this document, or for the application or design described herein. Semtech reserves the right to make changes to the product or this document at any time without notice.