Zanussi ZWC1301 User Manual page 5

the door opening. You can also lift the machine by
gripping the rear overhang of the top.
WARNING! Never lift the machine by
gripping it's control panel, door, or
detergent dispenser.
UNPACKING
When supplied the washing machine is packed
using a number of locking devices/packing pieces
to prevent drum and motor from damage in transit
All transit bolts and packing must be removed
before using the appliance.
1. Remove the external packaging. If necessary,
use a cutter. Open the door. Remove all items
from the drum.
2. Spread some of the polystyrene packaging
materials on the floor behind the machine and
then lay the machine carefully rear side down
on them. Make sure that no hoses are crushed
in the process.
3. Remove the polystyrene base from the bottom
of the appliance.
4. Return machine to it's upright position and
remove the power supply cable and the
draining and inlet hose from the hose holders
on the rear of the appliance.
5. With a suitable spanner unscrew and remove
the three screws and their spacers on
machine's rear.
6. The three holes must then be plugged with the
plastic plug caps supplied in the bag
containing the instruction booklet, which can
be found inside the drum.
5