Connection - Toshiba TDP TDP-EX20 Owner's Manual

Connection

Before connection
• Read the owner's manual of the device you are connecting to the projector.
• Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal
• Turn off the power of both devices before connecting.
• The figure is a sample connection. This does not mean that all of these devices can or
must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Computer
Computer
(for control)
p.96
To
To RGB
RS-232C
output
terminal
Control cable
RGB cable
(supplied)
Audio cable
(not supplied)
Audio cable
(not supplied)
To audio input
To audio
White (L)/Red (R)
output
Audio amplifier, etc.
, etc.
p.94
Computer Video recorder, etc.
To audio
output
White (L)/
Red (R)
To RGB
To audio
output
To audio output
output
RGB cable
Audio cable
Audio cable
(not supplied)
(not supplied)
(not supplied)
S-video cable
(not supplied)
Monitor cable
Audio cable
Mini D-sub
(not supplied)
15P-BNC
(not supplied)
To Y/C /C
B R
To audio
output
output
Green (Y)/Blue
White (L)/
(C )/Red (C )
B R
Red (R)
Conversion adapter
BNC-pin (not supplied)
DVD video recorder, etc. Video recorder,
DVD player, etc.
24
Notes
• The COMPUTER 1 IN terminal functions identically to the COMPUTER 2 IN terminal.
• The MONITOR OUT terminal outputs signals from the COMPUTER 1 IN terminal or
the COMPUTER 2 IN terminal, or outputs Y/P
button. If no input is selected, the MONITOR OUT terminal outputs the input signals last
selected for each input terminal.
• Signals are output from MONITOR OUT terminal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
• A computer monitor cannot accept Y/P
•
The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.
• When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
• Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
To video • Moving pictures played back on computers using DVD software may appear unnatural if
output
it is projected with this projector, but it is not a malfunction.
AV cable
(not supplied)
To S-video
output
/P signals as selected with the INPUT
B R
/P signals correctly.
B R
25