Advertisement
MOUNTING CAMERA
CHECKING BALANCE
If the Smartphone does not stay leveled when mounted, please do as
following:
Step 1: Loosen the Roll balance Knob.
Step 2: Make small Adjustment t by sliding the horizontal arm. Until the
mobile intersects stabilizer with a 70-100 degree.
Step 3: Tighten the Thumb Screw after the phone is well balanced in level
to ensure normal operations
or
/h NOTEDS:
Proper adjustment of balance ensures better power saving during operation.
The stabilizer may still function well when the gravity center is not properly configured; however,
it may lead to more power consumption on the motors, and can greatly affect the torque output.
13
Place Smartphone to mounting clip,
as show. Slide the Smartphone all
the way to right until it touches Tilt
Motor.
AWARNING!.............................
ALWAYS
MOUNTYOURCAMERAPRIOR
TO POWERING ON.
FAILURE TO DO CAN DAMAGE
THE UNIT!
CHANGE ORIENTATION
The Stabilizer comes with 2 different Way for Change Orientation
Switching From Horizonta
Keep the phone facing yourself and rotate the Stabilizer handle over 70
degrees
in counterclockwise direction, Stabilizer will enter vertical shooting Mode.
(Phone camera upward).
Keep the phone facing yourself and rotate the Stabilizer handle over 70
degrees
in clockwise direction, Stabilizer enter vertical shooting. (Phone camera
upward).
14
Advertisement
