Advertisement
OPERATING To Power On
Press the power button for about 3 seconds to turn on the
power supply, and the stabilizer will start working again.
Turn off the power for 3 seconds or so.
11
OPERATING MODES
Press the Power Button, The stabilizer enters Lock Mode each
time when powered on. (Default Mode).
Single Click Mode button to Switch into Pan Following Mode.
Single Click the MODE button to enter into Pan&Tilt Follow Mode.
Please make notes of each motor and
operating Mode details(showing on this
page), as stabilizer comes pro-program
with 3 different mode.
SWITCHING STABLIZER MODES
Pan & Tilt Follow Mode
Pan Following Mode
Roll axis is locked.
Tilt & Roll are locked.
The camera pans (Left/right) and
Pan axis rotates (Left/Right)
tilts (Up/Down) are following the
smoothly with turn of wrist.
movement of camera.
Push Joystick up and down to
Push Joystick up and down to
control the tilt of camera, use
control the tilt of camera, use
joystick left and right to
joystick left and right to
manual pan
manual pan left/right.
left/right.
Lock Mode
Pan,Tilt, Roll axis are all locked.
The camera keep still and stable,
which mean Camera cannot follow
handle's movement.
Push Joystick up and down to
control the tilt of camera, use
joystick
left and right to manual
12
pan left/right.
Advertisement
