Advertisement
Joystick
Control movement UP/DOWN (Tilt Motor) and LEFT/RIGHT (Pan Motor)
*The Joystick can be used in All 3 Modes.
Power ON/OFF
To Power on: Press & Hold the Power/Shooting button for 3-4 seconds
until the Status Indicator light flashes blue, and then turns ON Green finally.
To Power off: Press and holder the
POWER Button for 3 seconds
Double-click the front and back lens to switch ；
Triple-click the photo and video switch.
Shooting Function
After Bluetooth Connected between the mobile and stabilizer, use SHOOT
button to take photos or video ； double click can be taken continuously.
MODE Button
Single Press to cycle through the 3 Modes
that you set.Double click the MODE button to bring the camera to its original
position.
USB CONNECTION
IN-USE CHARGING
Connect the Micro USB Port on the side of
stabilizer's handle to a power source SUCH AS a
power pack (not include) to extend run-times.
Power Supply Connecting line
MOBILE CHARGING
The USB port at the bottom of the stabilizer handle can be used for charging of your
Smartphone while in use on the Stabilizer.
■An L-shape charging connector is required when the Smartphone is mounted
horizontally on the mobile clamp.
MICRO Interface Connecting line Mobile interface
■Note: if you need to charge your cell phone in the horizontal
mode, please use your own L plug data line.
USB
10
Advertisement
