Download Print this page

Safety Operation Guidelines - Nuoue S5 User Manual

3 axis gimbal stabilizer

Advertisement

WARNING
  Read the ENTIRE User guide to become familiar with the
features of our Stabilizer before operating. Failure to operate the
product correctly can result in damage to the product or personal
property, and cause serious injury. This is a sophisticated product.
It must be operated with caution and common sense and requires
some basic mechanical ability. In_x0002_correct Use of product in
a safe and responsible manner could result in injury or damage to
the product or other property. This product is notintended for use
by children without direct adult supervision. DO NOT usewith
incompatible components or in any way otherwise as mentioned
orinstructed in the product documents provided by our company.
This SafetyGuidelines herein contain instructions for safety,
operation andmaintenance. It is essential to read and follow all of
the instructions andwarnings in the user manual, prior to assembly,
setup or use, in order tooperate the product correctly and avoid
damage or serious injury.
SAFETY OPERATION GUIDELINE
The Stabilizer should be used in temperatures from 0°C to 40°C.
Use of the battery in environments above 40°C can lead to a fire or explosion. Use
of battery below 0°C can lead to serious damage.
■CHARING THE BATTERY
1. Always use our company approved charger for charging. Our company takes
no responsibility if the battery is charged using Non-Our company charger.
2. Do not put the stabilizer near flammable materials or on flammable surfaces
(such as carpet or wood). Never leave the battery unattended during charging to
prevent any accident.
3. Do not charge the battery immediately after use, when the Stabilizer
temperature may be too high. Do not charge the battery until it cools down to near
room temperature .Charging the battery with its temperature over 40°C or lower
than 5T: may lead to leakage, overheating, or battery damage.
4. Examine the charger and cable before use; make sure there is no damage to
the enclosure, cord, plug, or other parts. Never use a damaged charger. Do not
clean the charger with denature alcohol or other flammable solvents. Never use a
damaged charger.
5. The Intelligent attery will stop charging when it is full. Disconnect the batteries
from the charger when fully charged.

Advertisement

loading