Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
1.3 Notes
No.
Notes
Communication
1
connection
2
Input voltage
3
Input channel
4
Waterproof
5
Write register
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
If the communication mode is UDP mode, the radio device must be server and cannot
be Client.
DC, not AC, DC voltage is between 8~28V：
Under 8V, device won't work，beyond 28V, device will be damaged.
2 channel digital isolated input，DC input voltage difference should be 6~28V.
It is not water proof, keep it away from water or permanent damage will be caused.
Registers 4004 and 4005 are reserved registers and cannot be written. After a
write-through error, only the reset button can be used to reset the device parameters.
E830-DIO(ETH-2A) User Manual
Description
4
Advertisement
Table of Contents
