Udp Server - Ebyte E830 Series User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

4.3 UDP Server

(1) UDP Server means that the source IP address is not verified on the basis of normal UDP. After each UDP packet
is received, the target IP is changed to data source IP and port number. The IP and port number that was sent to the most
recent communication when sending data.
(2) This mode is usually used for data transmission scenarios where multiple network devices need to communicate
with the module and do not want to use TCP due to the high speed and frequency.
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
Figure 4-4 UDP Server
E830-DIO(ETH-2A) User Manual
13