Status Led; Figure 5-4 Status Led; Figure 5-5 Connection Of The External Alarm Clamps - Andrew Node G Series User Manual

5 Maintenance

5.2.3. Status LED

For local supervision, a status LED at the bottom of the node gives an indication of a
summary alarm.
The kit contains one alarm LED and three
cables.
This 2-colour LED
equipment status information:
Green Normal operation condition
Red Summary alarm
Check the cables to the external
alarm connector.
Status Check power switch inside of
LED off the node.
Check mains cabling.
Check mains power.
If the customer will not use the LED kit
disconnect the three cables to the external
alarm connector.
ID No: 7164491
provides visual

figure 5-4 Status LED

blue
figure 5-5 Connection of the external
alarm clamps
green
red
Page 51