Using The Advanced Audio Settings Features; Using The Srs Wow ™ Surround Sound Feature; Using The Virtual Surround Sound Feature (Dolby ® Virtual/Srs Trusurround ™ ) - Toshiba 50HMX96 Operating Manual

HMX96_EN.book Page 58 Friday, April 28, 2006 12:03 PM
Using the advanced audio settings
features
Using the SRS WOW
feature
SRS WOW ™ is a special combination of SRS Labs audio
technologies (SRS 3D, SRS FOCUS, and SRS TruBass) that
creates a thrilling surround sound experience with deep, rich
bass from stereo sound sources. Your TV's audio will sound
fuller, richer, and wider.
™
To adjust the WOW settings:
1
Put the TV in STEREO mode (- "Selecting stereo/SAP
broadcasts" on page 45).
2
Press Y and open the Audio menu.
3
Highlight Advanced Audio Settings and press T.
4
Press b or B to highlight the WOW feature you want to
adjust, and then press C or c to adjust the item.
Advanced Audio Settings
WOW: SRS 3D
WOW: SRS FOCUS
WOW: SRS TruBass
Dolby Virtual
SRS TruSurround
Reset
WOW: SRS 3D — To turn the surround sound effect
•
On or Off.
Note: If the broadcast is monaural, the SRS 3D effect will
not work.
• WOW: SRS Focus — To turn the vocal emphasis effect
On or Off.
WOW: SRS TruBass — To select the desired bass
•
expansion level (Off, Low, or High).
5
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
WOW, TruSurround, SRS and l symbol are trademarks of SRS Labs,
Inc.
WOW and TruSurround technologies are incorporated under license
from SRS Labs, Inc.
58
Chapter 6: Using the TV's advanced features
™
surround sound
Off
Off
Low
On
Done
Using the virtual surround sound feature
®
(Dolby Virtual/SRS TruSurround
The Dolby Virtual/SRS TruSurround feature allows you to
enjoy virtual surround sound from the TV's speakers. This
feature is enabled only when the TV is receiving digital
broadcasts.
To turn on the Dolby Virtual surround sound feature:
1
Press Y and open the Audio menu.
2
Highlight Advanced Audio Settings and press T.
3
In the Dolby Virtual SRS TruSurround field, select
On.
Advanced Audio Settings
WOW: SRS 3D
WOW: SRS FOCUS
WOW: SRS TruBass
Dolby Virtual
SRS TruSurround
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To turn off the Dolby Virtual/SRS TruSurround
feature:
Select Off in step 3 above.
Note: The Dolby Virtual/SRS TruSurround and WOW SRS
3D features cannot be on at the same time. If you set one to
On, the other will automatically be set to Off.
™
)
Off
Off
Low
On
Done
HMX96 (E/F) Web 213:276