Connecting A Vcr And Antenna Or Cable Tv (No Cable Box) - Toshiba 50HM67 Owner's Manual

50HM67_EN.book Page 14 Thursday, March 29, 2007 11:28 AM

Connecting a VCR and antenna or Cable TV (no Cable box)

TV back panel
You will need:
coaxial cables
•
standard A/V cables
•
– For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) to VIDEO 2
on the side panel (instead of to VIDEO 1). Do not connect
both types of video cable to VIDEO 2 at the same time or
the picture performance will be unacceptable.
– If you have a mono VCR, connect L/MONO on the TV to
your VCR's audio out terminal using the white audio cable
only.
14
Chapter 2: Connecting your TV
To view the antenna or Cable signal:
Select the ANT video input source on the TV.*
To view the VCR:
Turn ON the VCR. Select the VIDEO 1 video input source on
the TV.*
* To select the video input source, press INPUT on the remote control
(- page 23). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.
From Cable TV or antenna
Stereo VCR
VIDEO AUDIO
L R
IN IN from ANT
CH 3
CH 4
OUT
OUT to TV
L R
HM67 (E/F) Web 213:276