Tv Front And Side Panel Controls And Connections - Toshiba 50HM67 Owner's Manual

50HM67_EN.book Page 11 Thursday, March 29, 2007 11:28 AM

TV front and side panel controls and connections

Front of TV
1
1 Remote sensor (behind the screen) — Point the remote
control toward this area of the TV screen (- "Remote
control effective range" on page 22).
2 Blue, Yellow, and Green/Red
See "LED indications" on page 62 for additional
information.
3 POWER — Press to turn the TV on and off.
If the TV stops responding to the controls on the remote
control or TV control panel and you cannot turn off the
TV, press and hold the POWER button on the TV control
panel for 5 or more seconds to reset the TV.
CHANNEL Uu — When no menu is on-screen, these
4
buttons change the channel (programmed channels only;
- page 32).
5 VOLUME + – — These buttons adjust the volume level.
6 INPUT — Repeatedly press to change the source you are
viewing (ANT, VIDEO 1, VIDEO 2, ColorStream
HD1, ColorStream HD2, HDMI 1, HDMI 2, HDMI 3,
PC).
7 MENU (ENTER) — Press to access the menu system
(- pages 29–30). When a menu is on-screen, the MENU
button on the TV's control panel functions as the ENTER
button.
ARROWS BbC c — When a menu is on-screen, these
8
buttons function as up/down/left/right menu navigation
buttons.
Chapter 1: Introduction
3
4
2
5
6
Control panel
9
10 VIDEO-2 IN — The side panel A/V connections are
Right side of TV
7
10
8
9
Side panel
EXIT — Press to instantly close an on-screen menu.
referred to as "VIDEO 2" and include standard A/V
inputs plus an optional S-video input.
Note: Standard (composite) video and S-video cables
carry only video information; separate audio cables are
required for a complete connection.
11
HM67 (E/F) Web 213:276