Please check the following points before charge operation: The HT Charger employs the circuit that has maximum output power of 50W. As a result it can charge Did you select the appropriate program, which is suitable for the type of battery?
Initial parameter set up several charge and discharge cycles. The HT charger will be operated with the default value of the essential user settings when it is started. Charging maintenance at low current for The screen displays the following information in sequence and the user can change the value of NiMH/NiCd/Pb.
Page 4
When you start a charge process, the integral safety Charging / Discharging of Lithium polymer batteries timer automatically starts running at the same time. This is programmed to prevent overcharging of the battery if These programs are only suitable for charging and discharging Lithium-polymer batteries with a it proves to be faulty, or if the termination circuit can not nominal voltage of 3.7V/cell only.
Page 5
Discharging Li-Po Batteries Ni-MH/NiCd battery charging program Lithium batteries do not have the so called „lazy These programs are for charging NiMH (Nickel-Metal Hydride) or NiCd (Nickel-Cadmium) battery battery effect“ which appears exclusively with NiCd or packs, which are commonly used for R/C models. For quick-charge batteries the chosen current should NiMH batteries when they are charged in only partially be as high as possible;...
This programm is for charging Pb (lead-acid) battery with a nominal voltage of 6 or 12V. Pb batteries The HT Charger incorporates a various functions of protective and monitoring to verify functions with its are totally different from NiCd or NiMH batteries. They can only deliver relatively low current compared state of the art electronics.
Charge current range: 0.1 - 5.0A In the event of a product defect during the warranty period, take the product and the CARSON sales receipt as proof of purchase date to any CARSON store. CARSON will, at its option, unless otherwise...
Need help?
Do you have a question about the HT Charger and is the answer not in the manual?
Questions and answers