Securing The Printer To Your Waist - Toshiba B-SP2D Owner's Manual

6. SECURING THE PRINTER TO YOUR WAIST

6. SECURING THE PRINTER TO YOUR WAIST
CAUTION!
Care should be taken not to drop the printer when securing it to your waist.
1) Attach the enclosed belt holder to the printer back with the two SMW-3x8
screws. It can be attached both horizontally and vertically.
Belt Holder
SMW-3x8
Screw
NOTE: When attaching the belt holder horizontally, the printer's upper side
should be positioned upside.
2) Insert the belt holder into your belt and lower the printer to secure it to your
waist.
6. SECURING THE PRINTER TO YOUR WAIST
6- 1
EO1-33038