Advertisement
Quick Links
Below Ground Pool Cover Box installation guide
Items you will need to install the box, 2 ropes or straps to carry and lift box, shovels, tape measure, spirit level or
levelling device, rubber mallet, 17mm socket or spanner, 2 concrete slabs 450mm x 450mm or 300mm x 600mm and
blue metal or stone aggregate equivalent (approx. 2 bags per 1m)
Prepare dig zone by removing pavers if being installed into pre paved area.
1.
Dig trench to minimum of 550mm wide, 555mm deep and at least 300mm past either side of the pools
2.
waterline edge. For example if pool is 4000mm wide dig trench 4600mm long.
If space is restricted on one side place box at least 100mm past the pool edge or as far as possible if pool
3.
wall is on a boundary, please ask us for advice on placement in restricted space circumstances.
Daisy Pool Covers
Phone: 1300 55 18 11
hello@daisypoolcovers.com.au
daisypoolcovers.com.au
Advertisement
Related Manuals for Daisy Below Ground Pool Cover Box
Summary of Contents for Daisy Below Ground Pool Cover Box
- Page 1 Below Ground Pool Cover Box installation guide Items you will need to install the box, 2 ropes or straps to carry and lift box, shovels, tape measure, spirit level or levelling device, rubber mallet, 17mm socket or spanner, 2 concrete slabs 450mm x 450mm or 300mm x 600mm and blue metal or stone aggregate equivalent (approx.
- Page 2 With box in the hole and end braces are sitting on concrete slabs level box up to required height via the 4 bolts inside the box, screw all 4 down so they touch the concrete slabs and then every 1 turn gives you approx. 1mm of lift. Daisy Pool Covers Phone: 1300 55 18 11 hello@daisypoolcovers.com.au...
- Page 3 Note: Square pools and pools with non-round paving generally will be ‘grab’ the cover more We rarely get a warranty claim but just in case anything goes wrong we’re here to help you. All Daisy products come with a pro-rata warranty which covers the purchaser for defective materials or workmanship on a pro-rata basis. The manufacturer will repair or replace the product upon inspection or photo image.