Cue Program - Sequential PRO 3 User Manual

Sync to Track 1: On, Off—
track 1 plays step 1. When off, all tracks play for their respective step
lengths.
Restart: On, Off—
parameter on restarts the sequence from step one each time you play a
note on the keyboard. If this parameter is off, each time you play on a
note on the keyboard, the sequence will begin from the most recent point
in the sequence.
Para Seq: On, Off—
chords of up to three notes and the Sequencer will record the individual
notes to track 1, track 2, and track 3 respectively. Each of these tracks
controls the pitch of one of the three oscillators. Paraphonic mode must
must be on for this parameter to be available. (Press the front panel
button.)
phonic

Cue Program

Cue Program provides a way to seamlessly switch to another program
while the Sequencer continues to play the active sequence. The program
will change in perfect sync with the last step of the sequence. The
sequence then continues to play using the new, cued program. This also
provides a simple way to copy a sequence from one program to another
if you resave the cued program once the program and sequence become
active.
To use Cue Program:
1. Start Sequencer playback.
2. Press and hold the
3. While you continue to hold
knobs to select the program you wish to transition to.
4. Release the
5. When track 1 of the Sequencer reaches its final step, the cued program
will load and and the sequence will continue to play seamlessly.
6. If you want to copy the sequence to the cued program (and overwrite
its original sequence) press the
Pro 3 User's Guide
When on, restarts all tracks to step 1 when
When the Sequencer is in
Enables paraphonic sequencing. You can play
cue program
cue program
button.
cue program
mode, turning this
gated
button. The bank/ program screen appears.
, use the
button twice.
write
para
and
bank program
Cue Program
-
79