Additional Sequencer Parameters (Display Menus) - Sequential PRO 3 User Manual

to the BPM. divide works with both internal and external clock sources.
Sets the note value for each Sequencer/Arpeggiator step relative
Divide:
The following table lists the divide values.
Display
Half
Quarter
8th
8 Trip
16th
16th Trip
32nd
64th
Swing: 50%...75%—
master tempo. The greater the amount, the more obvious the effect.

Additional Sequencer Parameters (Display Menus)

Additional Sequencer parameters are found in the menus in the main
display. To see these, press the
Play Source Sync to Trk 1
Keyboard
PLAY SOURCE
BPM Seq Param
The Sequencer Parameters menu
Play Source: Keyboard, Ext In, CV 1, CV 2, CV3, CV4—
the Sequencer is triggered. When set to
keyboard control playback. When set to
to the jack on the back of the Pro 3 will control playback. When
audio in
set to cv 1, cv2, cv 3,
voltage signal connected to the matching control voltage input jack on
the back of the Pro 3.
78 Sequencer
Tempo
BPM/2
BPM
BPM x 2
BPM x 3
BPM x 4
BPM x 6
BPM x 8
BPM x 16
Adds a variable amount of shuffle-like feel to the
record
Restart
SYNC TO TRK1 RESTART
Seq Modes
cv 4, playback is controlled by a control
or
Timing Division
Half note
Quarter note
Eighth note
Eighth note triplets
Sixteenth note
Sixteenth note triplets
Thirty-second note
Sixty-fourth note
button on the front panel.
Para Seq
On O
PARA SEQ
Arp
keyboard
, an audio signal connected
ext in
Selects how
, pressing a key on the
Sequential