Toshiba 1700 Series Connection Manual page 2

UPS Connections
Standard Unit with 208/240V Input, 120/240V Output Transformer Module
The figures below show the standard unit, consisting of one electronics module and one battery module, with the addition of
the 208/240V input, 120/240V output transformer module. The modules do not have to be stacked for the unit to operate;
however, if the modules are to be stacked please refer to the 1700 Series user manual for instructions on interlocking
modules.
To connect the modules electrically follow these steps:
Step 1
Plug the gray power cord coming from the transformer
module (labeled "Input from UPS") into the gray 20A
outlet on the back of the electronics module
Step 3
Plug the black power cord coming from the
transformer module (labeled "Input Power") into the
power source intended to supply power to the unit.
Step 2
Plug the black power cord coming from the electronics
module into the matching outlet on the back of the
transformer module (labeled "Output to UPS").
Step 4
Plug the blue battery connector coming from the
battery module into the matching blue connector on
the electronics module.