Technical Information - oticon Opn Series Instructions For Use Manual

Technical information

The hearing aid contains two radio
technologies which are described
below:
The hearing aid contains a radio
transceiver using short range
magnetic induction technology
working at 3.84 MHz. The magnetic
field strength of the transmitter is
very weak and always below 15 nW
(typically below –40 dBμA/m
(–12.20 dBμA/ft) at 10 meter
(33 feet) distance).
The hearing aid also contains a radio
transceiver using Bluetooth Low
Energy (BLE) and a proprietary
short-range radio technology, both
working at ISM band 2.4 GHz.
60 About Start-up Handling Options Tinnitus Warnings
The radio transmitter is weak and
always below 3 mW equal to 4.8 dBm
in total radiated power.
The hearing aid complies with
international standards concerning
electromagnetic compatibility and
human exposure. Only use your
hearing aid in areas where wireless
transmission is permitted.
Due to the limited space available on
the hearing aid, relevant approval
markings can be found in this booklet.
Additional information can be found
in the "Technical data sheets" on
www.oticon.global
More info
The manufacturer declares that this
hearing aid is in compliance with the
essential requirements and other
relevant provisions of Directive
2014/53/EU.
Waste from electronic
equipment must be
handled according to
local regulations.
Declaration of Conformity is
available from the manufacturer.
Denmark
61