6. Slide and hold the battery release latch to free the battery pack for
removal, then slide out the battery pack.
7. Return your computer to the upright position.
For environmental reasons, do not throw away a spent battery pack.
Please return spent battery packs to your TOSHIBA dealer.
Installing the battery pack
To install a battery pack, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
Do not touch the battery release latch while holding the computer. Or
you may get injured by the dropped battery pack by unintentional
release of the battery release latch.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Close the LCD display panel and turn the computer upside down.
4. Insert the battery pack.
User's Manual
Battery lock
Battery pack
Releasing the battery pack
Power and Power-Up Modes
Battery release
latch
6-13