Advertisement
Erase all paired devices.
Factory default settings
Up and Down Buttons
Volume Up/Down
Next track
Previous track
Check Battery Status Press and hold + and -, together
Note: Your phone may not be compatible with some functions.
Charging the Earphones
Red LED indicates low battery.
1. Connect earphones to charging device using supplied cable.
2. LED is red while charging.
3. When earphones are charged, LED turns off.
Warning: Before charging, make sure the product is at room temperature, between 0 to 45°C
(32 to 113°F).
Note: Use this product only with an agency approved power supply which meets local regulatory
requirements (e.g., UL, CSA, VDE, CCC, INMETRO).
BT1 FAQ
Remote + Mic, Telephony, Voice Command and In-App use
Q.) How do I pair my wireless Sound Isolating
A.) With the BT1 product OFF, activate pairing mode by holding center button for 7 seconds on
the remote. Navigate to Bluetooth settings in the source device settings, and the device
SHURE BT1 should appear in available devices. Select BT1, and your device should be paired.
Phone off, press and hold past "power on, Bluetooth pairing
mode, battery life" messages to power down.
Click + or -
Press and hold +, 3 seconds
Press and hold -, 3 seconds
™
earphones with my device?
Advertisement
