Advertisement
SPECIFICATIONS
Power
Keypad
Temperature
Humidity
Bezel Size
Panel cutout
Communication
Immunity to ESD
Immunity to Transients Level 3 as per IEC1000-4-4
Radiated Susceptibility Level 3 as per IEC1000-4-3
Emission
ORDER NUMBERS
Part Numbers
Description
OIS40R
Operator Interface Station.
TKRS485
RS485 Communication Cable T2N) 2m w/ 15
pin D shell & pigtail.
CAB-OIS-T1-X
RS232 Communication Cable 2m w/ 8 pin
mini DIN & 9 pin D-shell (T1)
CAB-OIS-T2-X
RS232 Communication Cable (T2E/T2N/T3)
9830
Beldon RS485 Cable (or equivalent)
Communications Cable 24 AWG low
capacitance (T1, T2E, V-Series)
26-117B
RadioShack RS232 Programming Cable
(or equivalent), 9 pin D shell (male & female)
Note: The OIS40R has a 9 pin D shell female connector for connection to the PLC. This connector can be setup as either
RS485 or RS232. For RS485 connection, one end of the Beldon 9830 cable must be terminated with a 9 pin D shell (male)
connector.
ADJUSTABLE SPEED DRIVES MOTORS CONTROLS UPS INSTRUMENTATION PLC DCS
13131 West Little York Rd Houston, TX 77041
Ph: 713-466-0277
Fax: 713-466-8773
US: 800-231-1412
Canada: 800-872-2192
Email:
plc@tic.toshiba.com
Rev 2003.4.1
24 VDC +/-10%, 2 W maximum
IP65 rated keypad
Operating: 0 to 50 degrees C
Storage: -25 to 80 degrees C
10% to 90% (Non condensing)
101.30 H X 182.50 W, Depth:36.80
mm
79.00H X 162.00 W mm
Connects to PLC RS232/R485 port
Level 3 as per IEC1000-4-2
EN55011 CISPR A
Mexico: 001-800-527-1204
Website:
www.tic.toshiba.com
PROTOCOLS
Toshiba T-Series PLCs
Toshiba V-Series Integrated Controllers
Toshiba G7/S9/VF_nC1 ASDs
Modbus
Special (check with Toshiba)
DIMENSIONS
Available Through:
Advertisement
