Advertisement
MTX NEMA 3R MV
MTX Standard Specifications
Volts
Amps
62
4160
124
186
Dimensions and Weight
Horsepower
500 HP
1000 HP
1500 HP
Power Requirements
0 to120 Hz
Output Frequency (Hz)
Three phase 4160 V Input Isolation Transformer. 36 Pulse Design with Input Fused Disconnect and Vacuum Contactor.
Main Circuit
IGBT Output
Control Circuit
Internally Supplied 120 V and 230 V
Voltage: ± 10%, Frequency ± 5%
Tolerance
Control Specifications Input
Control Method
Multi-level Pulse Width Modulated (PWM) Output Control
Frequency Precision
± 0.5% of Maximum Output Frequency: Analog Input, 0.01% Digital Input
V/F Control
V/Hz, Sensorless Vector Control, Variable Torque, Closed Loop Vector Control, Constant Torque (Option)
Acceleration/Deceleration
0.1 to 6000 sec
Soft Stall (Automatic Load Reduction Control During Overload)
Main Control Functions
Restart into a rotating motor.
Current Limit, Overcurrent, Overcharge, Overload, Undervoltage, Overvoltage, Ground Fault, CPU Error, Cooling Fan
Main Protective Functions
Abnormal
Ethernet; Optional Profibus, Modbus RTU, Modbus, TCP/IP, TOSLINE-S20, and DeviceNet Available
Data Transmission
115% FLA for 60 sec
Overload Ratio
Liquid Crystal Display/
4 x 20 Graphical Backlit LCD Display. Ability to Display Multiple Parameters on one Screen.
Electronic Operator
Flash Upgradeable Software. Includes Multi-Function Rotary Encoder and Ethernet PC Interface
Interface (LCD EOI )
Run (Red) / Stop (Green), Remote / Local, Indication of Inverter Status
LED Indications
Local / Remote, Monitor/Program, Run, Enter, ESC, Stop / Reset, Up, Down
Keys
Illuminated Interlock and Fault Reset Push Buttons
Push Button
Eight Selectable Voltage or Current Output Signals with Programmable Functions
Analog Outputs
Two Selectable Voltage or Current Input Signals
Analog Inputs
Eight Digital Inputs with Programmable Functions
Digital Inputs
Six Available Digital Outputs with Programmable Functions (One used internal to drive.)
Digital Outputs
Type 3R
Enclosure
Free Standing, Front-Maintenance Type, Top or Bottom Access for Motor and Power Cables
Panel Construction
Bright White
Color
Ambient Conditions
Ambient Temperature
0 to 50˚C
Humidity
Maximum 95% (No Condensation)
Altitude
1000 m Above Sea Level or Less
Installation
Outdoor
Typical Applications
Fan, Blower, Pump, Compressor, Extruder, Options for Submersible Puming Applications
Standards
Electrical Performance: NEC, ANSI
NEC, NEMA, UL, CUL
Components and Others
**Typical HP rating of a 4 pole motor. Contact factory for applications on constant torque loads.
ADJUSTABLE SPEED DRIVES
INDUSTRIAL DIVISION
13131 West Little York Road, Houston, Texas 77041
Tel 713/466-0277 Fax 713/466-8773
US 800/231-1412 Canada 800/872-2192 Mexico 01/800/527-1204
www.toshiba.com/ind
Copyright 10/2006
HP
500
1000
1500
H x W x D (in)
107 x 168 x 63
Interface
Construction
MOTORS
Model Number
MTXA44050S
MTXA44100S
MTXA44150S
Weight (lb)
15000
MTX - a New Benchmark
in Deliverable Medium
Toshiba proudly introduces the MTX N3R
Outdoor Medium Voltage ASD.
the world's first ASD specifically designed for
outdoor mounting in remote applications or
applications where a building does not exist. It
features an innovative enclosure design and
power section topology that is unprecedented in
the medium voltage ASD arena.
The MTX is two enclosure types married
together. The transformer section is convection
cooled. There are no moving parts, and heat is
eliminated through passive vents at the top of
the drive. The inverter section is forced cooled.
Power modules are designed with the heat sinks
out-the-back to send waste heat to the
atmosphere. The interior of the inverter section
is cooled using plate-type heat exchanger(s)
so it remains cool and clean without introducing
outside air.
The new topology is a logical progression of the
provenT300MVi design in a UL rain tight enclosure.
Additionally, you will achieve a lower cost of
ownership with the MTX because heat removal
from a building-based drive is eliminated.
CONTROLS
UPS
Available Through:
Voltage Technology
INSTRUMENTATION
*MVDMTXFlyer061013*
The MTX is
PLC
Advertisement
