Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Axis Manuals
  4. Security Camera
  5. Q2901-E
  6. How-to manual

Axis Q2901-E How-To Manual

Use with camera station
Hide thumbs Also See for Q2901-E:

Advertisement

Quick Links

Download this manual
© Axis Communications AB

Advertisement

loading
Need help?

Need help?

Do you have a question about the Q2901-E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Axis Q2901-E

Summary of Contents for Axis Q2901-E

  • Page 1 © Axis Communications AB...
  • Page 4 In the following example we will add the web page of the AXIS Q2901-E into AXIS Camera Station to enable the operator to use the spot measurement tool. 1. Select New View(+ icon) at the bottom right of the page.
  • Page 5 You can configure the spot temperature to be displayed as a text overlay. 1. Enter the web interface of the AXIS Q2901-E, select Setup and then select Video Stream from the Video & Audio menu. 2. Tick the include text box and insert #JC Degrees Celsius and press Save. Note that...
  • Page 6 3. Now the temperature of the spot measurement will be displayed in the top of the video image. You can configure an alarm to be triggered when a zone rises above or falls below a certain temperature. 1. Enter the web interface of the camera, select set up and then Temperature Detection within the Detectors menu.
  • Page 7 5. The next step is to create an Action rule in AXIS Camera Station. Open the Configuration tab and select action rules from the Recording and events menu. Select New….. 6. Select Add a trigger and select Device Event. 7. Select the AXIS Q2901-E as the device.
  • Page 8 Http triggers which can be used to activate audio messages on an Axis speaker such as the AXIS C3003-E. The example below will create an alarm alert message which is sent to the operator and the view will automatically change to the temperature alarm camera when the alarm temperature is reached.
  • Page 9 16. To automatically change the operators view select Live view. Choose the camera view to be shown when the alarm is activated. 17. Multiple action can be associated with the alarm, click Next when complete. The next option is to add a schedule, configure this if it is required. 18.