10.0 WARRANTY AND AFTER SALES 1.0 INTRODUCTION Thank you for choosing your new Smirthwaite Whirl Terzo Stander. The Whirl has been designed to give excellent symmetry and enable children from a young age to gradually develop and maintain their ability to weight bear. It is suitable for children who require minimal to high levels of support and control.
2.0 ILLUSTRATION OF YOUR WHIRL TERZO STANDER A. Padded thoracic support B. Padded pelvic support C. Activity tray and bowl D. Knee cups E. Mechanical angle adjustor F. Indexable footrests 2.1 TECHNICAL DATA Size Product Code 8349 8350 User Height...
STOP! Please read these instructions CAREFULLY and THOROUGHLY. The user should NOT be left unattended whilst using the Whirl Terzo. Always ensure a responsible adult or carer is in attendance. Regular maintenance checks and cleaning are essential for the safe use of this equipment (see care and maintenance section).
Set the stander up approximately to these measurements and make final adjustments when the user is in place. Smirthwaite offer, at no extra charge, an appointment with a product specialist who will assist in the initial product set up.
5.0 ADJUSTING YOUR STANDER IMPORTANT! Provided with your Whirl Terzo you will find a 4mm and 6mm Hexagon key. Please use this to adjust your product. 5.1 MAIN COLUMN HEIGHT The main column height adjusted by loosening screw (A) with the 6mm hexagon key provided.
Page 7
5.3 PELVIC SUPPORT 5.3.1 Height Loosen the 6mm screw (G). Slide the pelvic support section to desired height. Retighten the 6mm screw (G) 5.3.2 Depth Loosen both lever locks (H). Adjust the depth of the pelvic support to the desired position.
Page 8
5.4.3 Angle Rotate hand wheel (M) to give the desired angle. 5.5 TRAY 5.5.1 Height Loosen lever lock (N). Lift tray to the desired height. Retighten level lock (N). Loosen 2 screws (P) using the hexagonal driver.
5.7 INDEXING FOOT RESTS 5.7.1 Angle Adjustment Accurate foot placement can be achieved by making incremental adjustments of each foot rest. Loosen the locking hand wheel (R) on the foot rest. Pull the footrest outward slightly and rotate to the desired angle, using the stopper pin as a guide (S).
The user should not be in the stander while the checks are carried out. 7.2 SERVICE INTERVAL The Whirl Terzo should be serviced every 1 year. Servicing must only be undertaken by a Smirthwaite service engineer, or by a Smirthwaite trained representative.
8.0 GUARANTEE & SERVICE The Whirl Terzo stander is issued with a full parts and labour guarantee for 2 years from the date of delivery. This guarantee does not apply to accidental damage caused through inappropriate use of the product. This guarantee is issued at the discretion of G&SSmirthwaite Ltd on RTB (Return to Base) basis.
Page 12
10.0 WARRANTY & AFTERSALE 10.1 Product Information Model: Size: Date of Manufacture: Serial Number: 10.2 Service & inspection record form: Date Procedure Service Personnel...
Need help?
Do you have a question about the Whirl Terzo and is the answer not in the manual?
Questions and answers