Use Of Appropriate Tools And Equipment; Handling Of Hazardous Materials; Handling Of Rotating Blade, Shaft And Driving Belt - Daedong DSC48 Workshop Manual

DSC48
2.7 USE OF APPROPRIATE TOOLS AND
EQUIPMENT
• Use the appropriate tools in proper size. If an inappro-
priate tool is used, it can be slipped which can dam-
age parts or injure you.
• Do not confuse units (mm, inch, etc.).
• Use the air impact wrench only when unscrewing the
bolts or nuts. Such wrench should not be used when
assembly precisely machined parts which its tighten-
ing torque should be strictly observed. It can cause
malfunction.
• Be careful of a socket popped out due to the turning
force when using the air impact wrench. Especially, be
extra cautious when working on connection or socket
with joint.
• When lifting the combine harvester with a hydraulic
jack or a hoist, fi x it fi rmly and install the auxiliary sup-
port. Never work under the combine harvester if the
support and the hydraulic jack (hoist) are not installed.
• When using a hydraulic jack or a hoist, do not use it
over the limit of the equipment and the conveying belt.
• Make sure that the hydraulic lock operates properly
before using the hydraulic jack. Improper use of lock
can cause a serious accident.
• Check the buttons and operating direction of the hoist
before using it. Improper operation can cause a seri-
ous accident.
• Do not use wooden blocks or bricks as support under
the combine harvester. As the combine harvester's
weight is continuously applied to them, they can be
broken or collapsed.
2.8 HANDLING OF HAZARDOUS
MATERIALS
• Do not use pressurized air to blow out hazardous ma-
terials, such as clutch dust, with compressed air. Inhal-
ing such hazardous materials can damage your health.
IMPORTANT
• All KIOTI's genuine parts contain no asbetos.
• These materials should be rinsed or wiped away after
spraying oil.
Apr. 2007
2.9 HANDLING OF ROTATING BLADE,
SHAFT AND DRIVING BELT
T46W022A
• Be careful not to get caught by the rotating engine
cooling fan.
• You can be seriously injured if your hand or clothes is
caught by the rotating fan belt or A/C belt.
T46W025A
T46W026A
0
-7