Creative Sound Blaster Pro Getting Started page 6

Installation Overview
This section is intended for the user who requires only a minimum amount
of instructions to get the audio card installed. If you need more
information, please refer to Chapter 2.
GETTING
STARTED
Installation is easy
and
fast
Just
zoom down this
slide to get your
system blasting
sound
in
no time.
CONNECT
EXTERNAL
SPEAKERS
TEST
AUDIO
CARD
Enter TEST-SBP
from your sowid
directory.
expansion slot.
-1
~iili~
. .
Switch on your
system. Insert
your Audio Card
Disk # 1 into the
,, disk drive and
r,+-- -;
~ enter INSTALL.
USING
YOUR
SOUND
SYSTEM
Read the
accompanying
documentation
==~--~
for information
on making full
use of your
sound system.
1
Knowing Your Audio Card
This chapter helps you locate and identify the components of your audio
card. The components of the audio card are divided into the following
categories:
LJ Jacks and Connectors
D Jumpers
D Volume Control Knob
Jacks and Connectors
There are several jacks and connectors on the audio card. A jack is a
one-bole connecting device for inserting a plug. Jacks are found
exclusively on the card's rear panel. A connector is a connecting device
consisting of many pairs of pins. Connectors are found on the audio card
and its rear panel. The jacks and connectors on the audio card are shown
in Figure 1-1.
Il'"
flM.l.CTl.
~
'"'81
m:;il[;JJl'7
JPll
~ .. !!::!I c;-••
-;i
L'Dln
l'.<1nncct<ir
Figure /-/: The jacks and connectors on the audio card.
Knowing Your Audio Card 1-1