Advertisement
Please check to ensure that you have the necessary hardware.
1- Seat Caps, 2- Phillips head screws, 3- Metal Seat Posts, 4- Clear, plastic washer, 5- Plastic screw
Step 1) Insert plastic screw into bolt hole,
place plastic washer and seat post, then
insert screw into the slotted area.
Step 3) Place toilet on metal seat posts.
Make sure it locks into place.
© 2014
|
Icera USA
|
St. Thomas Creations
Step 2) Using a Phillips head screwdriver,
tighten the screw to the plastic anchor.
Leave it loose enough to adjust the seat to
the bowl.
Step 4) To remove the seat, press the 2
inner buttons and lift the seat upwards.
www.icerausa.com
|
www.stthomascreations.com
Advertisement
