Table of Contents
Advertisement
OIL FILTRATION
• Ensure the oil container (15) is assembled, empty and in place inside the
appliance.
• Once the oil has cooled down to room temperature, turn the oil filtration control
knob (14) to the FILTER OIL ( ) position (ill.
the oil container (15). The oil filter cover (11) will keep food residues from being
transferred to the oil container (15).
• When all oil has been filtered:
- Turn the oil filtration control knob (14) to the LOCK ( ) position if the container
will remain inside the appliance.
- Turn the oil filtration control knob (14) to UNLOCK ( ) position if the container
is to be removed from the appliance.
NOTE:
- Always wait 3 to 4 hours until the oil has cooled down completely, before
draining or filtering.
- Extreme caution must be used when moving the appliance while the oil
reservoir (9) and oil container (15) are not both empty.
- When removing the oil container (15) from the appliance, handle with care.
Keep the oil container (15) flat and hold it with both hands.
Emptying the oil container
Filtered oil can be stored in a suitable container ( Storing oil) or re-used for frying a
new batch of food ( Cooking with oil).
• Unscrew the cap (16) on top of the oil container (15) (ill.
• Slowly pour the oil container (15) content into a suitable container or the oil
reservoir (9), if required.
NOTE:
- Ensure the oil filtration control knob (14) is on UNLOCK ( ) position before
pouring oil into the oil reservoir (9).
- Tilt the oil container (15) upwards (vertical position) gradually to avoid leaks
from the side of the container.
- Oil can be stored in the oil reservoir (9), inside the deep fryer or in another cool
dry place ( Storing oil).
• Screw the cap (16) back on top of the oil container (15).
• Insert the oil container (15) back into the appliance and turn the oil filtration
control knob (14) to the LOCK ( ) position to secure the oil container (15) in
t
place (ill.
).
STORING OIL
• Do not store used cooking oil in the refrigerator. Choose a cool place that is not
subject to sunlight. Generally, oil may be stored for a period of 3 months, once
the bottle is opened. Please observe the oil manufacturer's storage directions as
well.
Walmart_Deep Fryer_563865679_V5_170626.indd 14-15
). The oil will start dripping inside
r
s
).
14
HINTS AND TIPS
• Smaller quantities of food normally require a slightly shorter cooking time than
larger quantities of food.
• To reduce cooking time, defrost food prior to cooking. It is recommended that
some foods should not be thawed/defrosted prior to cooking, such as frozen fish,
and frozen French fries.
• It is recommended to use a meat thermometer to check the cooking progress.
• In the event of food flare-ups, do not remove the lid (3), do not remove the
basket (6); turn the temperature control knob (24) to the 0 position and unplug
the appliance.
• When the food you are cooking requires shaking, it is recommended to use
a timer set for half of the suggested cooking time. This way a bell will ring and
remind you to shake the basket (6).
• It is recommended to only use nylon, heat-proof plastic or wooden cooking
utensils. Metal utensils may become hot and damage the non-stick surface.
Always remove utensils from the appliance. Do not leave them in the appliance
during use.
CLEANING AND MAINTENANCE
Proper maintenance will ensure many years of service from your appliance. Clean
the appliance after every use. The appliance contains no user serviceable parts and
requires little maintenance. Leave any servicing or repairs to qualified personnel.
WARNING:
- Always turn the temperature control knob (24) to the 0 position, disconnect
the plug (17) from the wall outlet and then the magnetic plug (18) from the
control panel assembly (22) before cleaning. Allow all parts of the appliance to
cool down completely.
NOTE:
- Do not immerse the power cord with plug (17), magnetic plug (18) or
appliance into water or any other liquids. Do not use abrasive cleaners, steel
wool or scouring pads. Dry all parts thoroughly after cleaning, before using or
storing the appliance. Ensure that no water enters the appliance housing (13).
- Do not attempt to attach the magnetic plug (18) permanently to the appliance.
- Do not attempt to remove the silicon rubber sealing plate (23).
• Ensure the oil container (15) is in place, then turn the oil filtration control
knob (14) to FILTER OIL ( ) position to empty the oil reservoir (9) ( Oil filtration).
• Place the basket (6) on a clean, flat and heat resistant surface.
15
6/26/17 10:59 AM
Hide quick links:
Advertisement
Table of Contents
