Related Manuals for General Hobby Baron 15cc Series
Summary of Contents for General Hobby Baron 15cc Series
- Page 1 Baron 15cc Wingspan: 63inch/1600mm Length: 43.3inch/1100mm Flying weight: 1800g Wing Area: 37.9sq.dm Engine Size:15cc...
- Page 2 Main and tail landing gear Lock the wheels Use plastic sheet and self-tapping screws to lock the main landing gear as shown Insert the tail landing gear wire into the rudder.
- Page 3 Lock the tail wheel plastic sheet onto the fuselage tail by self-tapping screws.
- Page 4 Main wing Find out the wing connection wood. Lock the decorations onto the wings as shown Fix the wings onto the fuselage by two nylon screws...
- Page 5 Rudder and Stabilizer...
- Page 6 Cut out the holes on the stab and elevator Insert the vertical fin into the stab, and the fuselage tail slot Cut out the holes on the fuselage tail as shown Lock the stab onto the fuselage tail with aluminum angle as shown Fuel tank...
- Page 7 Engine Find out the two pcs of nylon engine support Lock the engine support onto the fuselage head. Install the engine onto the engine support...
- Page 8 Motor Find out the motor mount, and other pcs as shown Cut out the holes on the fuselage head as shown, for the cowl support. Hook the motor mount onto the fuselage head, and glue it tightly Install the motor onot the motor mount...
- Page 9 Cowl Install the cowl onto the airplane head with self-tapping crews.
- Page 11 CG=85mm...
Need help?
Do you have a question about the Baron 15cc Series and is the answer not in the manual?
Questions and answers