5
Measure a value for preset
white balance either by
pressing J or by pressing the
shutter-release button all the
way down.
•
If the camera is able to measure
white balance, the new value will be
reflected in the display.
•
If the camera is unable to measure
white balance, a message will be
displayed and the camera will
return to Step 4. Measure white balance again after
repositioning the white balance target ( r ) or the like.
6
Press the Q / g ( U ) button to exit direct
measurement mode.
White balance presets can be viewed
by selecting [Preset manual] for
[White balance] in the photo or
movie shooting menu. The position
of the targets used to measure preset
white balance is displayed on presets
recorded during live view.
Shooting Settings
219