Before Use; Hints; Assembling; Filling The Water Tank - Westfalia DF-A002 Instruction Manual

Before Use

Remove all packaging from the steam brush. Do not leave packaging materials
lying around; plastic bags may become a deadly toy for small children.
Due to function tests carried out by the factory, residual humidity may remain in
the water tank. This is no reason for concern.

Hints

Brush A with the white, soft bristles is suitable for curtains, carpets and cloth-sofa.
Brush B with the grey fabric removes dirt on linen, cotton clothing and soft cloth.
Do not steam on leather, wax polished furniture, velvet or steam-sensitive
materials. A burnt smell in the first moments of operation is not dangerous and
will disappear in a matter of moments.

Assembling

1. According to your requirement, select brush A or B.
2. Tilt the desired brush slightly forwards and insert the pin into the suitable
notch. Pull the lock/unlock button (8) towards the handle and press the brush
evenly until it locks tightly into the heating plate.
3. Turn the lock/unlock button (8) toward the handle and dismount the brush by
pulling it upward.

Filling the Water Tank

Never fill detergent, chemicals or other liquids in the water tank! Do not use
chemically decalcified water but use distilled water to keep calc deposition in the
steam system to a minimum.
1. Always unplugged the steam brush before filling.
2. Hold the steam brush horizontally and flip open the water filling cover (1). Use
the included cup and fill it with water only up to Max mark (approx. 80 ml). Fill
the water in the water tank and close the cover (1) tight.
Operation
6