Toto TS100G Installation And Owner's Manual page 6

• To adjust the height of the slide
hanger upward, simply raise the slide
hanger to the desired height.
• To adjust the height of the slide
hanger downward, press the re-
lease lever and lower the hanger
to the desired height.
• Adjusting the angle of the slide
hanger back and forth:
• Set the showerhead securely in the slide
hanger and set it to the desired angle.
• Depending on the angle of the showerhead,
water may drip out after it has been shut off.
If that happens, please adjust the angle.
• Adjust the angle of the showerhead for the
desired water flow. If there is too much water
flowing out the shower, the showerhead may
fall off the holder.
• Please do not turn the slide hanger with
excessive force. Doing so could cause product
damage.
USING THE PRODUCT
6
Slide Hanger
Release Lever
USING THE PRODUCT
Slide hanger
Showerhead