Montage C100/C120 - TCi C70 User Manual

Hide thumbs Also See for C70:
Table of Contents

Advertisement

3.32 Montage C100 und C120
So gehen Sie bei der Montage vor:
Achten Sie auf fachgerechte Montage durch autorisiertes Fachpersonal. Das
!
Gerät muss von der Stromversorgung getrennt und damit Spannungsfrei sein.
1.) Legen Sie nach dem Auspacken das Gerät mit der Front nie auf einen harten Unter-
grund, Sie könnten damit den Touch beschädigen.
2.) Bitte beachten Sie, dass die Systeme zum Einbau in eine Wandstärke mit maximal
10 mm vorgesehen sind.
3.) Nehmen Sie nun den Ausschnitt gemäß Kapitel 6 angegeben Ausschnittsmaß vor.
4.) Befestigen Sie nun das System mit den mitgelieferten Klemmen und ziehen diese
gleichmäßig fest. Reihenfolge beim Anziehen beachten: Zuerst Oben, MItte und dann
die unteren Klemmen, max. Drehmoment: 0,2 bis 0,3 Nm. Durch zu festes Anziehen
der Klemmen kann das Gehäuse beschädigt werden.
5.) Schließen Sie nun das System gemäß Kapitel 3.2 an.
Ludwig-Rinn-Straße 10-14 • D- 35452 Heuchelheim/Gießen • Phone: +49 6 41-9 62 84-0 • Fax: +49 6 41-9 62 84-28 • www.tci.de
Seite 14 von 36
3.32 Mounting C100 and C120
Follow these points by the mounting
!
1.) Never put after unpacking the equipment with the front on a hard underground, you
could thereby the touch damage.
2.) Please note that the systems are intended to the installation into a wall thickness with
maximally 10 mm.
8x = C100
10x =C120
3.) Make now the cutout in accordance with chapter 6 indicated cutout measure.
4.) Fasten now the system with the clamps provided and tighten these. Sequence when
tightening: First the top, middle, and then the lower holders max. Torque: 0.2 to 0.3
Nm. Caution: By to firm tightening of the clamps can be damaged the housing.
5.) Attach now the system in accordance with chapter 3.2.
Ludwig-Rinn-Straße 10-14 • D- 35452 Heuchelheim/Gießen • Phone: +49 6 41-9 62 84-0 • Fax: +49 6 41-9 62 84-28 • www.tci.de
Please attend of professional mounting by authorisied personal. Furthermore the
system must be separate from the electricity supply and so that voltage free.
8x = C100
10x =C120
Seite 15 von 36

Advertisement

Table of Contents
loading

This manual is also suitable for:

C100C120C70-xs9686

Table of Contents