Gps Antenna Position - Matsutec HP-528A User Manual

3.1.2 Vessel Name
The vessel's name is of up to 20 characters.
3.1.3 Vessel Type
Push ▲or ▼ key to select your vessel type from the list, then push
ENT key to save it or press MENU key to cancel.

3.1.4 GPS antenna position

A : Bow, 0 ~ 511 meters.
B : Stern, 0 ~ 511 meters.
C : Port, 0 ~ 63 meters.
D : Starboard, 0 ~ 63 meters.
Press MENU to cancel or press ENT key
to save the configuration.
3.1.5 Setting CPA/TCPA
Enter CPA (Closest Point of Approach) and TCPA (Time to CPA) values.
These settings help you find a dangerous target to avoid a collision.
When an AIS target is closer than your CPA and TCPA settings, an
alarm icon will flash on the up left corner of the screen and the alarm
buzzer sounds.
• Push ▲or ▼ key to select either "CPA" or "TCPA."
• Push ◀ or ▶ key to input the value into that item.
• CPA : default 6 km
• TCPA : default 6 min
Push MENU key to cancel or press ENT key to save the configuration.
3.1.6 Setting Channel TX
Switch on/off the channel TX.
If channel TX is switched off, the unit works as a AIS receiver.
Page 18 of 24