2.3.3 Display options
Press MENU key twice to pop up an option window:
1. Show COG line or not.
2. Show the waypoint name of the
GOTO, or of the route or of all the
waypoints.
2.3.4 Add a new waypoint
Use arrow key ▲,▼,◀ ,▶ to move cursor in the plotter screen, and
press ENT key to add a new waypoint at cursor position.
2.3.5 Waypoint pop-up menu
Use arrow key ▲,▼,◀ ,▶ to move cursor to a waypoint, when you get
an enlarged image of the waypoint, it means the waypoint is being
selected.
Press ENT key, a pop-up menu appears as one of below, so operations
could be made on the selected waypoint.
Different content menu will pop up, that is depending on the state of the
selected waypoint.
For example,
WP0006 is a normal waypoint, neither a GOTO or of a GOTO route,
WP0001 is a GOTO waypoint,
WP0002 is a waypoint of a GOTO route,
WP0003 is a skipped waypoint of a GOTO route,
A GOTO waypoint could not be deleted until it is cancelled GOTO.
Page 13 of 24