Installation Options; Fitting With Battens - SystemAir VTR 200 Installation Instructions Manual

4 Installation options

4.1 Fitting with battens

Battens (F) should be
screwed to the ceiling
mounting kit from inside
of both sides with added
self-tapping screws (C)
and washers (D).
VTR 200 Ceiling mounting kit
210647
2x Batten (minimum 45 x 45
mm)
Screw battens with a ceiling
mounting kit to the main ceiling.
These screws are not included.
Choose them based on your
ceiling structure.
Leave at least a 4 mm gap
between ceiling mounting kit
and false ceiling to prevent
vibration noises.
2
Installation instructions
Systemair Sverige AB