Table of Contents
Advertisement
Infinea BluePad 2.0 User Manual
Pairing BluePad 2.0
You can pair the BluePad to your iOS device using of two
methods.
Method one, pair the BluePad 2.0 to Bluetooth 3.0 only.
1.
Press and hold down the On/Off button for two seconds
approximately.
2.
After a few seconds, the unit is ready and you can access the iOS
Settings > BlueTooth option to locate the device to pair.
Note
This process can only be done once.
3.
Run the iOS application.
Scan to Pair BluePad 2.0
Method two, scan to pair the BluePad 2.0 to your iOS device
via BLE.
1.
Press and hold down the On/Off button for two seconds
approximately.
2.
After a few seconds, the unit is ready and you can access the iOS
Settings > Scan Barcode.
3.
Once the camera phone is activated, scan the serial number on
the back of the BluePad using the phone camera. The Bluetooth
Pairing Request is displayed on both screens.
4.
Confirm the passkey is the same on both, and then tap Pair.
12
Advertisement
Table of Contents
Need help?
Do you have a question about the Infinea BluePad 2.0 and is the answer not in the manual?
Questions and answers