Toshiba Satellite M35 Series User Manual page 60

60
Getting Started
Using external display devices
Using a poor quality cable may result in a dull or fuzzy
picture, poor color, ghosting, video noise, or loss of video.
Connecting to the video-out port
NOTE
To connect the device:
1 Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its video-in port.
2 Connect the other end of the video cable to the video-out
port on the left side of the computer.
3 Turn on the external video device.
4 Set the display mode by pressing
Display Properties settings. For more information, see
"Directing the display output when you turn on the
computer" on page
Video cables are not included with your computer. To connect
a device to the video-out port, you will need to purchase an S-
video cable.
TECHNICAL NOTE: If you are connecting to a television, you
may need to change the display properties. Most televisions
use or support an 800 x 600 standard resolution.
Fn + F5
61.
, or by setting the