46
Getting Started
Adding memory
Charging the battery
Your computer came with its battery already installed. Before
using the battery to power the computer, you must charge it.
To charge the battery, leave the computer plugged in to an AC
power source for at least three hours with the computer
turned off. After that, the battery will be completely charged
and ready to power the computer.
Adding memory
Your Satellite
memory to run most of today's popular applications. You
may want to increase the computer's memory if you use
complex software or process large amounts of data.
For more information on memory options, check the
accessories information that came with your computer, or
visit
toshiba.com
Once the battery is charged for the first time, avoid leaving the
computer plugged in and turned off for more than a few hours
at a time. Continuing to charge a fully charged battery can
damage the battery.
HINT: To purchase additional memory modules, see the
accessories information packaged with your system or visit
toshiba.com.
®
M30/M35 Series computer comes with enough
.