Toshiba Satellite M110 Series User Manual page 78

78
Getting Started
Turning off the computer
To use any of these methods, you first need to enable them in
Toshiba's Power Saver utility.
1 Click Start, Control Panel, and then Performance and
Maintenance.
2 Click the TOSHIBA Power Saver icon.
3 Click the Setup Action tab.
4 Select Standby for the options you want.
5 Click Apply.
6 Click OK.
NOTE
Once the computer is configured, you can place it into
Standby mode by either pressing the power button or closing
the display panel, depending on the Standby options set.
Starting again from Standby mode
To start up the computer from Standby mode, press the power
button until the power button and the on/off light glow blue.
The computer returns to the screen(s) you were using.
If you place the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
When I press the power button
Set this option to Standby if you want the computer
to go into Standby mode when you press the power
button.
When I close the lid
Set this option to Standby if you want the computer
to go into Standby mode when you close the display
panel.
For more information about the Power Saver utility, see
"TOSHIBA Power Saver" on page 164.