Toshiba Satellite M110 Series User Manual page 178

178
Toshiba Utilities
Fingerprint Authentication Utility
5 Click the button above the finger you want to enroll.
6 Swipe your finger on the reader.
A sample will be created and indicated by a Fingerprint
icon.
7 Repeat the previous step. Swipe the same finger on the
reader two more times to create two more samples.
8 The final template will be created from these three samples.
NOTE
If your system supports power-on security, a Power-on button
is also displayed above each enrolled fingerprint. This button
is shown pressed by default, indicating that your fingerprint is
automatically added for power-on authentication.
During fingerprint enrollment, the system displays icons as
prompts, notifications, and warnings. These icons and their
meanings are as follows:
Reader ready—the reader is waiting to read your
fingerprint. Swipe your finger when you are ready.
Reader busy—wait for the reader to complete its
operation.
Problem with operation—the reader could not read your
fingerprint. Swipe your finger again.
Operation succeeded—the reader successfully read or
verified your fingerprint.
Failed to verify the user—the fingerprint could not be
matched.
Error reading fingerprint—the finger was too far to the
left or right. Center your finger and swipe it again.
If you do not use a Windows password, you will be prompted
to define a new (non-empty) one. This is not necessary, but a
password improves the security of your software.