Scrolling With The Touchpad; Control Buttons; Disabling Or Enabling The Touchpad - Toshiba Satellite M110 Series User Manual

62
Getting Started
Using the TouchPad™
Once you have positioned your cursor, you can click it into
place by either double-tapping the TouchPad or clicking the

control buttons.

Scrolling with the TouchPad

There are two active regions on the TouchPad
to scroll as you would with any wheel device on a mouse or
trackball.
To scroll vertically, run your finger up or down along the right
edge of the TouchPad. To scroll horizontally, run your finger
along the bottom edge of the TouchPad. This feature can be
disabled or changed in the Mouse Properties dialog box.
Control buttons
When a step instructs you to click or choose an item, move
the cursor to the item, then press and release the primary
(left-hand) button. To double-click, press the primary button
twice in rapid succession. The primary button usually
corresponds to the left mouse button.
The function of the secondary (right-hand) button depends on
the program you are using. It usually corresponds to the right
mouse button ("right-clicking"). Check your program's
documentation to determine whether it uses the right mouse
button.

Disabling or enabling the TouchPad

The TouchPad
disable TouchPad setting:
1 Click Start, and then Control Panel.
The Control Panel window appears.
2 Click Printers and Other Hardware.
3 Click the Mouse icon.
The Mouse Properties window appears.
™
™
is enabled by default. To change the enable/
™
that allow you
™