8 Self diagnosis and special mode setting
This unit is equipped with features of self-diagnostic & special mode setting for checking the functions & reliability.
8.1.
Service Mode Summary Table
The service modes can be activated by pressing various button combination on the main unit and remote control unit.Below is the
summary for the various modes for checking:
Player buttons Remote control unit buttons
[STOP]
[4], [7]
Player buttons
Remote control unit buttons
Note :
[DIMMER]
Applicable in
Doctor Mode
[
[
[SLEEP]
To Enter into Doctor Mode for various checking
FL ALL Segment inspection
[7]
Forced VOL setting
[8]
Forced VOL setting
[9]
Forced VOL setting
], [1], [2]
CR 100 Traverse Test
], [1], [4]
CD Auto Adjustment Display
Cold Start Setting
Application
Application
(Refer to the section "8.2. service mode Table 1
& Table 2 for more information.)
(Refer to the section "8.2. service mode Table 1
& Table 2 for more information.)
(Refer to the section "8.2. service mode Table 1
& Table 2 for more information.)
(Refer to the section "8.2. service mode Table 1
& Table 2 for more information.)
(Refer to the section "8.2. service mode Table 1
& Table 2 for more information.)
(Refer to the section "8.2. service mode Table 1
& Table 2 for more information.)
(Refer to the section "8.2. service mode Table 1
& Table 2 for more information.)
13
SA-PM4E / SA-PM4EB / SA-PM4EG
Note
(Refer to the section "8.2. for more information.)
Note