Objective Heater Submenu - Okolab UNO-COMBINED-CONTROLLER Manual

Set Point 37.0°C
Base 37.0 HM 37.0
Lid 37.0 OBH 37.0

Objective Heater Submenu

Menu 1/2
Select an Adapter
Offset
à
Objective Heater
From the main menu press the 'Menu' key on the front panel.
Move the cursor to the item 'Objective Heater' with the Arrow Keys.
Press Enter with the cursor on the item 'Objective Heater'.
The User can set the item 'Objective Heater' value to «on» or «off» to enable or disable the
Objective Heater. When the Objective Heater is disabled, in the Main Page the Objective
Menu 1/3
à
Offset Mode
Offset
Objective Heater
Menu 1/3
Offset Mode
à
Offset
Objective Heater
Insert the Offset
à
Base:
Lid: -03.2
HM:
Figure 26. How to insert the custom offset values.
Objective Heater 1/2
à
Enabled: OFF
Offset: 0.0
Ramp °C/min 0.5
Figure 27. Objective Heater Settings Menu.
-
â
8
-01.2
Insert Offset
-03.0
8
Select the value
to be changed
8
á
Change
â
the value
41
Enter to
8
confirm
Values
á
Move the cursor to the
Parameter to be
â
Confirm
8
new value
Exit
-
changed
Exit
-