Minidisc Mode/Cd Changer Mode; Inserting A Minidisc; Removing The Minidisc; Activating Minidisc Mode - Blaupunkt Dallas RMD 169 Operating Instructions Manual

MiniDisc mode/CD changer mode

This unit enables you to play MiniDiscs. CDs
can also be played with the aid of a Blau-
punkt CDC A 06, A 072, A 08, A 05, A 071
or IDC A 09 CD changer.
These CD changers are available from your
dealer.
Note:
Only use standard circular 12 cm diameter
CDs in the CD changer.
8 cm diameter CDs or CDs with different
shapes, e.g. of a butterfly or beer glass, are
not suitable for playing.
Such CDs present a serious risk of damage
to the CD and to the drive.
We can accept no liability for damage aris-
ing from the use of unsuitable CDs.

Inserting a MiniDisc

• Switch on the unit and disengage the
control panel with knob 1.
The control panel drops forward.
• Insert the MiniDisc with the label facing
upwards in the direction indicated by
the arrow. Do not use force.
The MiniDisc is automatically transported to
the playing position. The MiniDisc is played.
• Fold the control panel up on the left-
hand side and engage.
22

Removing the MiniDisc

• With the control panel disengaged,
hold the Eject key (arrow) down for ap-
prox. 1 second.
The MiniDisc is ejected.
Do not obstruct or assist automatic inser-
tion or ejection of the MiniDisc, as the mech-
anism may otherwise be damaged.
If the MiniDisc is not removed, it is drawn in
again automatically after approx. 30 sec-
onds.
For safety reasons, the control
panel must always be engaged
whilst the vehicle is moving.

Activating MiniDisc mode

A MiniDisc is inserted, "DISC-IN" appears
on the display.
• Press MD.

MD text

The names of the MD and individual tracks
can be displayed if they are stored on the
MiniDisc.

Activating/deactivating MD text

• Hold the DIS key down until a beep
sounds. The text "MDTXT ON" or "NO
MDTXT" is displayed.

Displaying the MD text

• Press MD briefly.
Condition: SCROLL is set to OFF in the DSC
menu. SCROLL ON causes the name to run
across the display.
Refer to the "Programming with DSC -
SCROLL" section.