Ambient NanoLockit Quick Start Manual

Connect your nanolockit to a red camera
Hide thumbs Also See for NanoLockit:

Advertisement

Connect your NanoLockit to a
RED Camera

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NanoLockit and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ambient NanoLockit

  • Page 1 Connect your NanoLockit to a RED Camera...
  • Page 2 The LED will flash green / red, which means the LEMO timecode output is still muted. Now let us set the internal clock of the NanoLockit with the Audio Record- ers timecode. Connect the NanoLockit to the TC Port of...
  • Page 3 The LED flashes indicating it is ready to timecode sync another device. But before we can connect the NanoLockit, we need to set up the camera for use with an external timecode device. First we need to adjust the Project Frame Rate.
  • Page 4 „TC“ indicator on the display should turn green. There you have it – the RED is correctly connected to the NanoLockit and in per- fect sync with the audio recorder. Later in post-production, you will now have the ability to auto-conform relating clips to the timeline using any profession- al tool.
  • Page 5 For more information on that subject see our other Ambient tutorials. Additionally we strongly recommend that you check the synchronisation of your system by performing a test-run before shooting starts to avoid any issues. NanoLockit – the small, wireless and easy2use timecode generator by Ambient.

Table of Contents